By sunny 
On a hot summer’s day, there’s nothing better than enjoying a nice hot shower at home at the end of a busy day. Showering, as the ‘second most enjoyable thing in life’ after sleeping, should be a pleasant thing. However, the bathroom space is small, the water temperature is hot and cold, the ground water and other issues, but often make this enjoyment greatly reduced. This article will share some shower hacks to help you have a more comfortable bathing experience in the summer.
01, wet and dry separation: small bathroom shower wisdom
Even if the bathroom space is limited, to achieve wet and dry separation is the key to enhance the happiness of the shower. An independent, spacious and well-ventilated shower space is undoubtedly the ideal choice.
But for small households, the real three separate bathroom (shower area, toilet area, wash area completely independent) is often difficult to achieve, 8-10 square metres of space requirements for most families is not realistic. Therefore, we just need to make sure that the shower area is effectively separated from other areas, and do not have to pursue a completely independent space.
4-8 m² bathroom layout recommendations:
If the bathroom area between 4-8 square metres, you can refer to the following layout: shower area, toilet area, washing area in order, separated by a partition or glass door in the middle, not only to ensure privacy, but also to achieve wet and dry separation.
Minimalist programme for less than 4m² bathroom:
For a bathroom with a much smaller area, focus on meeting the three basic functions of shower, toilet, washstand can be. Laundry, storage and other needs can be transferred to other spaces, such as the balcony or bedroom.
Shower partition options:
While shower enclosures offer better privacy, the experience may not be as good and they are more expensive. In contrast, half-wall glass partitions are a more cost-effective option that can be done for under $1,000. However, glass cleaning is still a major challenge and requires regular cleaning to prevent limescale build-up.
Shower Area Size and Partition:
The shower area should be guaranteed a space of at least 90x90cm, with 90x130cm being more comfortable. If space is at a premium, an invisible partition is a good option, as it hardly affects the feeling of space and doesn’t fit as well as a waterproof shower curtain. However, it should be noted that the invisible partition needs to be dried after each use and then closed, relatively troublesome, and the texture is slightly inferior.
Floor and ventilation:
Shower area can be set at the entrance to the long strip of floor drain, instead of water blocking strip or sunken wet and dry separation, both beautiful and practical. Long floor drains are easy to get dirty, but they drain well and are friendly to the elderly and children. In addition, the shower area should be as close to the window as possible to allow for quick ventilation, keep it dry and reduce bacterial growth.
02, Water heater and shower: the key to shower comfort
The choice of water heater and shower is directly related to the comfort of shower. The two are properly matched, which can make your bathing experience to a higher level.
The choice of thermostatic water heater:
Constant temperature water heater can maintain a stable water temperature, but the performance of different brands and models varies significantly. When more than one person is using water at the same time, it is recommended to pair it with a thermostatic showerhead to prevent fluctuations in water temperature.
0 Cold Water Water Heater Considerations:
0-cold water heaters are not designed to save cold water that is drained off, but to achieve instant hot water and enhance the water experience. However, it consumes far more gas than it saves on water bills. The decision of whether to choose a 0-cold water heater needs to be based on one’s budget and needs.
Material and choice of shower:
The hardware material of the showerhead directly affects its service life and experience. It is recommended to prefer 59 copper, 304 stainless steel material, avoid zinc alloy. The nozzle part should avoid the use of PPA & ABS plastic material. In terms of colour, silver and white are easier to take care of, while black is less recommended due to its tendency to show limescale.
Pros and cons of in-wall showerheads:
In-wall shower has high value, can effectively save space, make the bathroom more spacious and neat. But the construction is difficult, you need to chisel the wall in advance of the pre-buried piping, maintenance and repair is also more troublesome.
03, Smooth Drainage: Cleaning Tips for After Showering
Poor drainage and water on the floor in the shower area is a headache for many people. Here are some shower hacks to help you solve your drainage dilemma.
Floor drain selection and installation:
Commonly used floor drains in the shower area are T-type and U-type. T-type floor drains drain fast and can block hair, but the anti-odour effect is general; U-type deep water seal floor drains have good anti-odour effect and smooth drainage, but require sufficient depth of the downpipe. Floor drain panel shape variety, but the drainage speed mainly depends on the diameter of the downpipe. Long strip floor drain is beautiful, but the construction is more difficult; small floor drain is more common, more economical.
Ground slope and tile selection:
In order to ensure the normal drainage of the bathroom, the bathroom floor must have a certain slope, the lowest point in the location of the floor drain. A general slope of 5 per cent is sufficient to avoid standing water. If you use a large drainage capacity of the top spray shower, you can appropriately increase the slope of the ground. The smaller the tile size, the easier to find the slope. But hexagonal tiles, although beautiful, but easy to accumulate water, mainly because the mason has concerns about paving the trouble.
Drainage and non-slip floor treatment:
In addition to the choice of marble with pull grooves, the shower base is also a good choice. It keeps water out and feels less cold on your feet for homes with elderly people. Pre-built the shower base in, it also prevents the floor from bulging.
Shower hacks: details determine comfort
In addition to the big aspects of remodelling mentioned above, there are a few shower hacks that can further enhance your bathing experience.
Pre-shower preparation:
Before your shower, turn on the hot water ahead of time to warm up your bathroom and avoid feeling cold right off the bat. Also, have a clean towel and change of clothes ready and within reach.
Tips when showering:
When showering, start by wetting your entire body with lukewarm water and gradually turn up the water temperature to the right temperature. Avoid using water that is too hot at the beginning to avoid irritating your skin. At the same time, you can use shower gel or soap to gently massage your body to promote blood circulation.
Post-shower care:
After showering, you should dry your body in time and put on clean clothes. For women with long hair, you can use a hair dryer to dry your hair to avoid catching cold. In addition, apply body lotion or moisturiser to keep your skin hydrated.
Conclusion
Summer has arrived, whether it is spacious and comfortable large shower area, or only meet the basic needs of the small shower area, master these shower hacks, can make you have a more enjoyable bathing experience in the summer. From wet and dry separation to the choice of water heater and shower, to the floor treatment that drains smoothly, every detail is related to your bathing comfort. We hope that what we have shared in this article will help you to enjoy every bathing time in the hot summer.